Kenwood DNX SERIES DDX6046BT - Manual (Page 35)

English 35 DDX SERIES DDX616/DDX6046BT/DDX516
Set Station Name
Assigns a name to a station.
Tune in to the station to name 1
See (page 32).
Start Name set 2
Enter the name 3
See (page 45) for information
on how to enter a name.
End Name set 4
Traffic Information
(North American sales area only)
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
Display the Source 1 Control Screen
See (page 32).
Set the Traffic information mode 2
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
⁄
• It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
• During the reception of traffic information the adjusted
volume is automatically remembered, so that the next
time it switches to traffic information the volume level is
that from the previously adjusted and remembered level.