Konica Minolta BIZHUP C451 - Manual (Page 296)

Setting up the PPD driver (Mac OS X) 8
C451 8-29
Front Cover: Attaches a front cover page. Select this check box, and then se-
lect the print conditions from the upper drop-down list, and the paper tray
that contains the loaded paper to be used from the lower drop-down list.
Back Cover: Attaches a back cover page. Select this check box, and then
select the print conditions from the upper drop-down list, and the paper tray
that contains the loaded paper to be used from the lower drop-down list.
Transparency Interleave: Outputs and inserts interleaves when printing over-
head projector transparencies. Select this check box, and then select the pa-
per tray that contains the loaded paper to be used from the lower drop-down
list.
2
Note
To print on the front cover and back cover, select “Print”. To only add a
blank page, select “Blank”.
The “Transparency Interleave” setting can be specified if “Transparency”
is selected as the paper type.