Konica Minolta BIZHUP C451 - Manual (Page 112)

Setting up network printing 3
C451 3-39
3.9 Printing with Macintosh
This section describes this machine’s settings and the Macintosh network
settings.
Specify the printer network port settings after installing the printer driver and
when selecting a printer. To select a printer, refer to “Selecting a printer” on
page 2-25.
Operations on this machine
Set the IP address for this machine. For the setting procedure, refer to “Set-
ting the IP address for this machine” on page 3-4.
Next, specify the AppleTalk or Bonjour settings for this machine as described
below.
2
Note
The settings can also be specified from PageScope Web Connection.
Specifying the AppleTalk settings
When connecting this machine to a Macintosh computer using AppleTalk,
the AppleTalk settings must be specified.
1
Press the [Utility/Counter] key in this machine’s control panel, touch
[Administrator Settings], and then enter the administrator password.
– The administrator password is required to enter Administrator
mode. Ask the administrator of this machine for the administrator
password.
2
Touch [Network Settings], then [AppleTalk Settings].