Kenwood DPX-3050 User Manual
Page 35
— 35 —
?
The songs in the selected folder aren’t played in Folder Select
mode.
77
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
?
The MP3 File/Folder search takes time.
78
✔ Many files are recorded on the media.
☞ When the media directory is complex, the file/folder search can
take time.
?
The MP3 related text isn’t displayed correctly.
79
✔ A character is entered that this unit can't display.
☞ For the characters that can be used for MP3 text entry, refer to
?
The MP3 file time isn’t displayed correctly.
80
✔ ---
☞ There are times when it isn’t displayed correctly according to the
MP3 recording conditions.
?
The songs in the selected folder aren’t played in Folder Select
mode.
102
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
If the following situations, consult your nearest service
center:
• Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS89, KDC-CPS87,
KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected, the Auxiliary input is entered when switching modes.
The messages shown below display your systems
condition.
EJECT:
No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.
E01
➪
Load the disc magazine properly.
No CD in the unit.
➪
Insert the CD.
No Disc:
No disc has been loaded in the disc magazine.
E02
➪
Load a disc into the disc magazine.
Error 04:
No disc has been loaded in the disc magazine.
E04
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
➪
Clean the CD and load it correctly.
Error 05:
The CD is upside-down.
E05
➪
Load the CD correctly.
Blank:
Nothing has been recorded on the MD.
E10
No Track:
No tracks are recorded on the MD, although it has a
title.
E11
No Music:
Media was played that doesn’t have data recorded
that the unit can play.
E15
➪
Use media that has data recorded that the unit can
play.
Error 30:
The faceplate of the slave unit being connected to
this unit has been removed.
E30
➪
Replace it.
Error 77:
The unit is malfunctioning for some reason.
E77
➪
Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 35