Kenwood DPX-3050 - Manual (Page 34)

English
— 34 —
? Can’t remove disc. 64
✔ The cause is that more than 10 minutes has elapsed since the vehicle
ACC switch was turned OFF.
☞ The disc can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
? The disc won’t insert. 65
✔ There’s already another disc inserted.
☞ Press the [0] button and remove the disc.
? Direct Track Search and Direct Disc Search can’t be done. 66-1
✔ Another function is ON.
☞ Turn Random Play or other functions OFF.
? Track Search can't be done. 66-2
✔ For the discs first or last song.
☞ For each disc, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
MP3 source
? Cannot play an MP3. 67
✔ Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
✔ The MP3 has no or invalid file name extension. 68
☞ Add the ".MP3" extension to the MP3 file name.
✔ The media is scratched or dirty. 69
☞ Clean the media, referring to the section on (page
5).
? Noise or no sound generated when an MP3 is played. 70
✔ The file has the MP3 file name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
? Takes time before the unit starts playing MP3. 71
✔ The medium contains many folders, files, and hierarchical levels.
☞ The unit checks all files on the loaded medium first. If the medium
has many files recorded, it may take a long time for the unit
before it starts playing MP3.
? Fails to play MP3 in the intended order. 72
✔ The MP3 files were not written by the CD writer in the order in which
you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 files are to be played by writing them onto a medium
with their file names beginning with play sequence numbers such
as "01" to "99".
? The sound skips when an MP3 is being played. 73-1
✔ The media is scratched or dirty.
☞ Clean the media, referring to the section on (page
5).
✔ The recording condition is bad. 73-2
☞ Record the media again or use another media.
? Can't display the ID3 tag information correctly. 75
✔ Record is not made in conformity with the ID 3 tag version1.x.
☞ Record in conformity with the ID 3 tag version1.x.
Troubleshooting Guide
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 34