Kenwood DPX-3050 - Manual (Page 12)

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information Display
Frequency
Station name
"SNPS"
Charactor
Clock
Switching Display
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM & AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to attach a title to
• A title can't be attached to MD or MP3 media.
• Disc Naming can't be done during clock display.
2 Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3 Move the cursor to the enter character position
Press the [
4] or [¢] button.
4 Select the character type
Press the [
38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME] button.
Station/Disc Naming (SNPS/DNPS)
General features
— 12 —
English
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 12