Receiving preset stations, Receiving preset stations in order, P.call) – Kenwood VR-8050 User Manual
Page 25: Listening to radio broadcasts, Press the tuner key to select tuner as the source, Use the p.call, Keys to select the desired station

25
EN
Listening to radio broadcasts
Receiving preset stations
TUNER
Numeric keys
1
Press the TUNER key to select tuner as the source.
2
Enter the number of the preset station you want to receive
(up to “40”).
Press the Numeric keys in the following order:
For “15”, press
0,5
For “20”, press
0,0,)
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
Receiving preset stations in order
(P.CALL)
(P.Call
@/#)
TUNER
1
Press the TUNER key to select the tuner as the source.
2
Use the P.Call
@
/
#
keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.Call
# does the following:
Pressing the P.Call
@ does the following:
Holding down the
# or @ keys, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
L
SL S
SB
SR
C
R
LFE
SP
MUTE
OPTICAL 6CH INPUT
COAXIAL
ANALOG
96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B
CLIP
AUTO DETECT
THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
04.3.5, 0:15 PM
25