Konica Minolta RD 3000 - Manual (Page 74)

74
ADDITIONAL FEATURES
CHANGING ISO SENSITIVITY
The CCD used in this camera has a sensitivity of ISO200 when shipped from the fac-
tory. It may be set to ISO800 if required.
This will improve camera performance by letting you use it in dark, indoor locations
with high shutter speeds, thus eliminating camera shake, and in the A mode (aperture
priority) with smaller apertures, thus ensuring a wider depth of field.
Press and hold the exposure
compensation button, then press
the SPOT button.
• The current ISO sensitivity will appear
on the data panel.
• Continue pressing both the exposure
compensation and SPOT buttons until
setting is complete.
1
With both buttons held down,
turn the dial to display ‘800’ in
the frame counter.
• The value in the frame counter
alternates between 200 and 800 with
each click of the dial.
2