Konica Minolta RD 3000 - Manual (Page 117)

117
CAMERA WARNINGS
MODE
P Shutter speed and
aperture blink Light level is
beyond the range
of available shutter
speeds and
apertures. In bright light, attach a
neutral density (ND)
filter, use film with
lower film speed, or
reduce the overall
brightness of your
surroundings.
In low-light, use flash
or another light source
to increase the
brightness of your
surroundings
-
A 2000 or 2˝
blinks Required shutter
speed is beyond
the range of the
camera. Select a larger/smaller
aperture until the
display stops blinking. 53
S Maximum or
Minimum aperture
blinks Required aperture
is beyond the
range of the lens Select a faster/slower
shutter speed until the
display stops blinking. 55
SPOT
blinks in the
viewfinder
Light level is below
the camera’s
minimum metering
range. Increase the
brightness, cancel spot
metering. 49
ALL LEnS - - appears Lens is not
attached or is
attached
improperly. Attach the lens, or
disconnect and
reattach the lens. 26
DISPLAY CAUSE ACTION PAGE