Konica Minolta RD 3000 - Manual (Page 61)

61
ADDITIONAL FEATURES
Reset to a new custom setting, or exit white balance setup by turning the dial while
pressing the WB button.
• The display will change from to or within 2 or 3
seconds. Do not make any other selections during this time.
• Custom setting is also possible for flash lighting.
• The correct white balance may not be obtainable with custom settings for subjects
under bright florescent lighting.
Press the shutter-release button
all-the-way down.
• The shutter will release, but the
camera does not record an image.
will appear briefly in the
data panel and viewfinder.
will appear on the data
panel, and in the viewfinder, if the white
balance custom setting is satisfactory,
and then return to the normal photogra-
phy display.
When the white balance cannot be set
correctly, for example when the selected
setting is outside the custom setting
range for the camera,
will
appear on the data panel, and in the
viewfinder, and the system will then
return to the condition prior to [4].
4