Kyocera 7135 - Manual (Page 93)

User’s Guide for the Kyocera 7135 phone 75
To perform a hard reset
Important: When you do a hard reset, all entries stored in the phone are
erased. You can restore previously synchronized data using a
HotSync operation. Perform a hard reset only as a last resort if a
soft reset has not solved the problem or you are instructed to do so
by the Kyocera Customer Care Center.
1. With the flip open, turn the Kyocera 7135 smartphone over. Open the battery
door on the back of the phone.
2. Press and hold down the backlight button on the keypad of the phone.
Keep holding down the backlight button as you use the stylus to press the
reset pin on the right side of the battery. Wait a moment and release only
the reset pin.
3. When the Palm logo appears, release the backlight key. The following
message appears:
4. Press the key below the screen to complete the hard reset and delete
your data. Press any other key to cancel the hard reset and keep your data.
Erase all data?
YES - “up” button
NO - any other button