Kyocera 7135 - Manual (Page 35)

User’s Guide for the Kyocera 7135 phone 17
Calibrating the screen—If the screen is unresponsive, follow these steps.
1. Open the flip. With the stylus, tap .
2. Tap the Prefs PDA icon.
3. Tap in the upper-right corner of the screen. From the picklist,
tap Digitizer. Follow the instructions on the screen.
When calibration is complete, tap to go to another application.
Warning: See Chapter 1, “Introducing the Kyocera 7135 smartphone,” in the
Reference Guide on the CD-ROM.
M
AKING AND
R
ECEIVING
C
ALLS
To dial a call on the keypad
1. Extend the antenna. Check the signal strength icon .
2. Press the keys to enter the phone number. Then press .
If you make a mistake, press
to remove the last digit you pressed.
Hold down to clear all digits.
3. To end your call, press .