Programmed play (pgm mode), Gp 0 m 1 i d c s, Gp 0 m 1 1 d t o n – Kenwood CD-206 User Manual
Page 14: Preparation
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
14
G
P
0
M
1
1
D
T
O
N
2
.
5
G
P
0
M
1
1
D
T
O
N
2
.
5
«
G
P
0
M
1
B
A
D
C
F
E
H
G
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
÷ Load a disc in the CD player.
Press so that the “PGM” indicator lights.
1
Preparation
Do this operation in the stop mode.
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
÷ Tracks can also be selected by pressing the 4 or ¢ key.
÷ Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷ When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
÷ When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
Start playback.
3
4
Repeat steps
1, 2 and 3 above.
Program desired tracks.
2
1
Select the disc.
Go to step
2 within 8 seconds.
3
Set the entry.
Go to step
3 within 8 seconds.
2
Select the desired track No.
In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/
DPF-R6010 only)
Press the numeric keys as shown below....
To enter track No. 25 :
005
: Keys and controls used in the operations described on this page.
Blinks.
Hereafter the illustration of the common parts
on the front panel is of CD-206/DPF-R6010.
P.MODE
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
4
¢
1
2
3
4
5
6
7
8
9
0
+10
P.MODE
G
P
0
M
1
I
D
C
S
?
PGM
5
4
3
2
1
G
P
0
M
1
1
D
T
O
N
?
.
?
5
REPEAT
TRACK NO.
DISC
NO.
5
4
3
2
1
PGM
2 5 P _ 0 1
1
CD-206/DPF-R6010
CD-204/203/DPF-R4010/R3010
Light up.
Track number
CD-204/203/DPF-R4010/R3010
6
Main unit
Remote control unit
CD-206/DPF-R6010
REMOTE CONTROL UNIT
RC-P0601