Kyocera Rave K-7 - Manual (Page 44)

36 Using Voice Recognition
when you hear the correct name. Say “No” when
you hear an incorrect name.
5. When you are finished, press . You cannot
end the call with a voice command.
Using voice features with
accessories
Some of the following features can only be used with
accessories, such as a hands-free car kit or hands-free
headset, which are sold separately. Accessories for
your K-7 Rave phone can be found at
www.virginmobileusa.com or
www.kyocera-wireless.com/store .
Waking up the phone
If your phone is connected to a hands-free headset,
you can use use a voice command to activate the
phone to make a phone call.
Voice Wake-up does not work with Keyguard active.
To activate the Voice Wake-up setting:
1. Select Menu
→
Settings
→
Voice Services
→
Voice Wake-Up
→
With ext. pwr .
2. Select Menu
→
Settings
→
Keyguard
→
Disabled , then press .
To wake up the phone:
3. Say “Wake Up” and listen for a tone.
4. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see
“Training voice recognition” on
page 37 .
Answering the phone
You can set the hands-free car kit to either (1) answer
automatically or (2) ring until you press a key or
answer using a voice command.
Answering automatically
To set it to answer automatically:
• Select
Menu
→
Settings
→
Accessories
→
Auto-Answer
→
After 5 secs .
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the hands-
free car kit or hands-free headset.
To turn off Auto-Answer:
• Select
Menu
→
Settings
→
Accessories
→
Auto-Answer
→
Disabled .