Kenmore ELITE 19005 - Manual (Page 3)

Press desired embroidery design to open the design in the Ready to Sew screen. Press the Edit Key on the Ready to Sew
window to open the design on the Edit screen for adjustments.
q Built-in designs
Press to access 30 embroidery designs, plus Clothsetter
crosshairs and outlines.
w Monogramming key
Press to choose from two fonts and two-or three-letter
monogramming.
e ATA PC Card key
Press to open a Saved File.
r Card Reader key
Press to read 19000-series memory cards.
*To use memory cards, Reader 19000 and Y-style RS-232 cable are required. These items are sold separately from 19005.
t Edit key
Press to open the Edit Screen.
Embroidery Screen
When you select an embroidery design, the visual touchscreen will show the design’s parts and their sequence numbers, the
thread color code, the presser foot to use, embroidery time, number of colors needed and the design’s actual measurements.
q Jog keys
Adjust the hoop position with the jog keys for precise
placement.
w Trace key
Check the size of the embroidery area by pressing the trace
key. The carriage traces the outline of the selected embroidery
pattern before embroidering.
e Color/Part keys
The thread color and embroidery order of each embroidery
part are indicated on these keys.
q
Edit Screen
In the edit mode, you can edit and combine designs to
create original embroidery. You can open the built-in
designs and monograms, or designs from the ATA PC
Card.
A Z
Edit
1 2 3 4
5 6 7 8
Designs
Hoop Size F: 126 X 110mm
SET
e
r
w
t
A Z
Edit
Ready to Sew
1 2 3 4
Size
2
P
F: 126x110mm
115x110mm
7 colors 54 min
Jog Jog
Moss
Green
Meadow Pale
Yellow
Pale Sky
246 269 210 216
ST ST
2
A Z
Edit
Cancel OK
Edit
e
q
w
EMBROIDERY MODE
Built-in Embroidery Designs
Embroidery Monogramming Chart
Built-in Stitches
BUILT-IN STITCHES