Operation – Kompernass KH 2391 User Manual
Page 14
16 GB/IE
[MULT OFF]: CD playback from the CD
compartment
cu
.
• Turn the “SEL / VOL” control knob
co
to set the
desired function.
BEEP ON / OFF:
[BEEP ON]: A beep is heard through the loudspeak-
ers when the radio is operated.
[BEEP OFF]: No beep is heard when the radio is
operated.
• Turn the “SEL / VOL” control knob
co
to set the
desired function.
SEEK 1 / 2 :
[SEEK 1]: The automatic station search stops at
the first radio station that can be received.
[SEEK 2]: The automatic station search only stops
after the
9
button
6
or the
:
button
7
is released.
• Turn the “SEL / VOL” control knob
co
to set the
desired function.
STEREO / MONO:
Stereo or mono sound playback during radio
reception.
• Press the “SEL / VOL” control knob
co
.
[STEREO] appears in the display window
9
.
• Turn the “SEL / VOL” control knob
co
again.
[MONO] appears in the display window
9
.
LOCAL / -DX-:
[LOCAL]: Radio stations in the local vicinity with a
strong transmission signal are played back.
[-DX-]: Distant radio stations with a weak trans-
mission signal are also played back.
• Turn the “SEL / VOL” control knob
co
to set the
desired function.
• Press the “SEL / VOL” control knob
co
.
Your settings are automatically stored.
After 10 seconds the device automatically changes
to playback mode.
L
Setting the volume
• Increase the volume by turning the “SEL / VOL”
control knob
co
in a clockwise direction.
• Reduce the volume by turning the “SEL / VOL”
control knob
co
in an anticlockwise direction.
Mute Function
The mute function enables you to turn off the
loudspeakers.
• Press the
MU/DIM
button
bo
. Playback is
muted and
[MUTE ON] appears in the display
window
9
.
• Press the
MU/DIM
button
bo
again. Playback
continues as before the MUTE function was
activated and
[MUTE ON] disappears from the
display window
9
.
L
Setting the 3-Band PLL Tuner
• Press the
•
MODE
button
cn
until TUNER ap-
pears in the display window.
You can select 3 x FM frequency bands (FM1, FM2
and FM3), 1 x medium wave frequency band (MW)
and 1 x long wave frequency band (LW). Each fre-
quency band has six presets on which you can
store radio stations.
• Press the
•
BAND
button
bl
and select the fre-
quency band you wish to receive. In the
display window
9
you will now see the desig-
nation of the frequency band (e.g.
[FM2]), the
frequency (e.g.
[99.20]) of a radio station that
is being received or the programme ID during
stereo reception and
[TP] for traffic information.
Automatic Station Search
In the case of preset playback function
SEEK1:
• Press the
9
button
6
or
:
button
7
for two seconds. The tuner automatically stops
at the first radio station that it receives and
shows the information in the display window
9
.
In the case of preset playback function
SEEK2:
• Press and hold down the
9
button
6
or
:
button
7
in order to approach the
desired frequency. After the button has been
Operation
KH2391_Content_UK.indd 16
05.09.2006 14:49:14 Uhr