Kyocera S1310 - Manual (Page 57)

User Guide 57
You can also press and hold the # Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
From Volume, you can modify the following
settings.
Set Ringer Volume
1. From Ringer Volume, scroll right or left to
set the ringer volume.
2. Press the OK key to save.
Set Speakerphone Volume
1. From Spkrphone Volume, scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
Set Earpiece Volume
1. From Earpiece Volume, scroll right or left
to set the earpiece volume.
2. Press the OK key to save.
Set Keypad Volume
1. From Key Volume, scroll right or left to set
the keypad volume.
2. Press the OK key to save.
Set Power On/Off Sounds
From Pwr On/Off, select Enabled to have
your phone play the sound when turned on.
Keypad
From Keypad, you can modify the following
settings.
Set Key Press Sounds
From Key Sounds, select Tone, Click, or Off
to set the sounds you hear when pressing the
keypad.
Set Key Tone Length
From Key Length, select Normal or Long to
set the length of the keypad tone.
Enable DTMF Tones
From DTMF Tones, select On to send
dual-tone multi-frequency (DTMF) tones when
you press the keypad.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From Headset Sounds, select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).