Kenwood DPX-MP3110 - Manual (Page 7)

English | 7
General Operation
Audio Control
You can adjust following Audio Control items ;
Adjustment Item Display Range
Rear volume “R-VOL” 0 — 35
Subwoofer level “SW L” –15 — +15
System Q “User”/“Rock”/
“Pops”/“Easy”/
“Top40”/“Jazz”/
“Natural” User setting/Rock/Pops/Easy/
Top 40/Jazz/Natural
(The indicator turns on
according to the setting.)
Bass level* “BasLV” –8 — +8
Middle level* “MidLV” –8 — +8
Treble level* “TreLV” –8 — +8
Balance “BAL” Left 15 — Right 15
Fader “FAD” Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
⁄
• “USER”: The customized Bass, Middle, and Treble levels
are effective. This item can be selected at any time.
* You can adjust these items in detail. Refer to
the detail of Audio Control> (Page 7).
* Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the Control knob.
3 Select the Audio item to adjust
Press the Control knob.
4 Adjust the Audio item
Turn the Control knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the Control knob.
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
Bass level
Adjustment Item Display Range
Bass Center Frequency ”BasF” 40/50/60/70/80/100/
120/150 Hz
Bass Q Factor ”BasQ” 1.00/1.25/1.50/2.00
Bass Extend ”B EX” Off/On
Middle level
Adjustment Item Display Range
Middle Center Frequency ”MidF” 0.5/1.0/1.5/2.0 kHz
Middle Q Factor ”MidQ” 1.0/2.0
Treble level
Adjustment Item Display Range
Treble Center Frequency "TreF" 10.0/12.5/15.0/17.5 kHz
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for Control knob and [ATT]
button.
1 Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see Control> (page 7).
2 Enter Detail adjustment mode of Audio
Control
Press the Control knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the Control knob.
4 Adjust the Detail Audio item
Turn the Control knob.
5 Exit the Detail Audio Control mode
Press the Control knob for at least 1 second.