Kenwood DPX-MP3110 - Manual (Page 4)

4 | DPX-MP5110U/DPX-MP4110/DPX-MP3110
General functions
Power/Source Select button [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”) , Tape
** (“TAPE“) , USB * (“USB”),
CD (“CD”) , Auxiliary input (“AUX”), and Standby
(“STANDBY”) each time this button is pressed.
Press at least 1 second to turn off the power.
* Function of DPX-MP5110U.
** Function of DPX-MP4110.
⁄
• When the power is ON, the (page 14) is
displayed as “Code On” or “Code Off”.
• For whether USB devices can be connected, refer to
Audio file> (page 18).
• When an optional accessory is connected, the source name
for each device appears.
Volume control Control knob
Turn the knob to adjust the volume.
Attenuator [ATT]
Turning the volume down quickly.
Auxiliary input Auxiliary input
Connect a portable audio device with mini-plug cable
(3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output Control knob
Switches between ON (“SW On”) and OFF (“SW
Off ”) each time pushing toward down for at least 2
seconds.
Tuner functions
Band select Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Tuning Control knob
Changes the frequency when pushing toward left or
right.
⁄
• During reception of stereo stations the “ST” indicator is ON.
Preset memory [1] - [6]
Memorize the station selected when pressing for at
least 2 seconds.
Preset tuning [1] - [6]
Recalls the memorized station.
[SRC]
[M.JOG]
[SE]
[1] [2] [3] [4] [5] [6] [ATT]
[ ]
[ ]
[COL]
Basic Operation
DPX-MP5110U Display
Control knob
USB Terminal
Disc slot DSI indicator
Auxiliary input