beautypg.com

Parallel interface connection – Kyocera FS-680 User Manual

Page 41

background image

Setup and Connections

1- 22

Parallel Interface Connection

1.

Plug one end of the printer cable into the connector on the printer marked with a

(parallel)

symbol.

2.

Close the clips on both sides to fix the connector in place.

3.

Plug the other end of the printer cable into the computer’s parallel (Centronics) interface

connector. This connector is usually labled PRINTER. For details, refer to the hardware

manual for the computer.

Clips

Printer Cable

Rear panel

See also other documents in the category Kyocera Printers: