Kyocera FS-680 - Manual (Page 13)

Introduction
xii
Safety & EMI Requirements
IEC IEC 60950:1991 (+A1+A2+A3+A4)/(IEC 60825-1:1993)
Laser requirements (U.S.A.) FDA Title 21, CFR Chapter 1, Subchapter J
UL UL 1950: 3rd edition
CAN/CSA CSA C22.2 No.950-95 3rd edition
FCC Rules 47 CFR, Parts 2 and 15, subpart B, Class B
CDC ICES-003 (Issue 3): 1997, Class B
AS/NZS AS/NZS 3548: 1995, Class B
Disclaimer
We shall have no liability or responsibility to customers or any other person or entity with respect to any liability, loss or
damage caused or alleged to be caused directly or indirectly by equipment sold or furnished by us, including but not limited to,
any interruption of service, loss of business or anticipatory profits, or consequential damages resulting from the use or
operation of the equipment or software.
Prolonged Non-Use and Moving the Printer
Prolonged Non-use
If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid possible damages that may
occur when the printer is used next time.
Moving the Printer
When you move the printer:
•
Move it gently.
•
Keep it as level as possible, to avoid spilling toner inside the printer.
•
If you ship the printer, remove and ship the process unit separately. Pack the process unit in a plastic bag
and ship them separate from the printer itself. Be sure to consult a serviceman before attempting long-
distance transportation of the printer.