Kenwood eXcelon KDC-X590 - Manual (Page 36)

36 | English
Basic Operations of remote control
Audio Control
[AUD] button
Selects the Audio item to be adjusted.
[VOL] buttons
Adjusts the Audio item.
• Refer to (page 12) for the operation
method, such as the procedures for Audio control and
others operations.
• The remote control can only select and adjust the
Basic Audio item. Selecting and adjusting of the Detail
Audio item cannot be done.
Function of the KDC-X590/KDC-MP632U
Dual Zone System
[2-ZONE] button
Each time you press the button, "2ZON" of
(page 14) is turned ON or OFF.
[ 5]/ [∞] buttons
Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone
System is ON.
In Tuner source
[FM]/ [AM] buttons
Selects the band.
Each time you press the [FM] button, the band
alternates between the FM1, FM2, and FM3
bands.
[ 4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the
(page 18) mode.
In Disc/USB source
[ 4]/ [¢] buttons
Going forwards and backwards between track/
files.
[ + ]/ [ – ] buttons
Going forwards and backwards between disc/
folders.
[ 38] button
Each time you press the button, the song pauses
or plays.
[0] — [9] buttons
When in (page 21) and
(page 21), enters the track/
file/disc number.
In SIRIUS tuner source
[FM] button
Selects the preset band.
[ 4]/ [¢] buttons
Searches up or down channels.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset channels.
[DIRECT] button
Enters and cancels the
mode.