Kenwood DPX-5010 - Manual (Page 6)

Switching Modes:
Each time you press the SRC (source) button, the mode
switches as follows:
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
NOTE
▼
Tuner mode
▼
Tape mode
▼
External disc control mode
▼
CD mode
▼
Standby mode
Switching Modes
Turning on the power:
Press the SRC (source) button.
Turn the power on before carrying out the following procedures.
Turning off the power:
Press the PWR OFF button for at least one second.
Selecting standby mode:
Press the SRC button repeatedly and switch to "ALL OFF".
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on. Use this mode when you want to have
the display illuminated but don't want to listen to anything.
NOTE
Power
DPX-5010 DIGITAL SIGNAL PROCESSOR
CD CASSETTE
DSP RECEIVER
VOLUME LAST ANGLE
MEMORY
7 CRSC 7 SBF
7 OFF PWR 7 OFF
7 NAME.S
7 7 7 8 7 9 7 0
SCROLL
B NR
SCN
RDM/B.S
COMPRESSION KBS SFC
DBB
SFC LEVEL
POSITION ROOM SIZE
REP M.RDM/MTL D.S
DISC
PROGRAM
DIS
C DIRE CT
DIGITAL X , OVER
RETURN
ANGLE
DISP
5 6
DIR AUD
EQ
FNC
FM +
AM –
CD OPEN/CLOSE TAPE OPEN/CLOSE
DSP
ATT
SRC
SRC/PWR OFF
ATT
u d
1 2 3 4
Basic operations
— 6 —
English
ATT indicator