Kenwood DPX-5010 - Manual (Page 30)

Function set system
— 30 —
English
To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the FNC
button to enter the function set mode and then display the
function to make the setting.
Select the mode that you want to make the setting of the
function.
Press the FNC button.
"Function Set" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the
¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the
4 button to search through the functions
backward.
Example: If you want to the setting of the touch sensor tone
function from on to off, first search through the
functions until you see "BEEP On" in the display.
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "BEEP Off" is displayed.
Ending the function set mode
Press the FNC button. 5
4
3
2
1
Function Set System
DPX-5010 DIGITAL SIGNAL PROCESSOR
CD CASSETTE
DSP RECEIVER
VOLUME LAST ANGLE
MEMORY
7 CRSC 7 SBF
7 OFF PWR 7 OFF
7 NAME.S
7 7 7 8 7 9 7 0
SCROLL
B NR
SCN
RDM/B.S
COMPRESSION KBS SFC
DBB
SFC LEVEL
POSITION ROOM SIZE
REP M.RDM/MTL D.S
DISC
PROGRAM
DIS
C DIRE CT
DIGITAL X , OVER
RETURN
ANGLE
DISP
5 6
DIR AUD
EQ
ATT
CD OPEN/CLOSE TAPE OPEN/CLOSE
DSP SRC
FM
4 ¢ AM
FNC
FNC
FM +
AM –
1 2 3 4
Function mode and setting display
AUTO indicator