Kenwood DPX-5010 - Manual (Page 24)

— 24 —
English
DSP features
Up to three sets of the DSP settings and conditions you
adjusted can be stored in the memory, and then you can recall
them with the single touch of a button.
Press the DSP button. "DSP CTRL" is displayed once the DSP
control mode is entered.
The DSP indicator blinks during the DSP control mode.
Make the DSP settings and adjustments that you want to store
in the memory.
Press the button (#1-3) that you want to use for the DSP
settingsand adjustments for at least two seconds.
The button number blinks once in the display to indicate that
the data has stored.
Press the DSP button to end the DSP control mode.
Recalling a DSP settings and adjustments you stored:
Press the DSP button. "DSP CTRL" is displayed once the DSP
control mode is entered.
The DSP indicator blinks during the DSP control mode.
Press the preset button (#1-3) for the desired DSP settings and
adjustments.
Press the DSP button to end the DSP control mode. 3
2
1
4
3
2
1
DSP Setting Preset Memory
Graphic Equalizer features
DPX-5010 DIGITAL SIGNAL PROCESSOR
CD CASSETTE
DSP RECEIVER
VOLUME LAST ANGLE MEMORY
7 CRSC 7 SBF
7 OFF PWR 7 OFF
7 NAME.S
7 7 7 8 7 9 7 0
SCROLL B NR SCN RDM/B.S
COMPRESSION
KBS
SFC
DBB
SFC LEVEL
POSITION
ROOM SIZE
REP M.RDM/MTL D.S
DISC
PROGRAM
DIS C DIRE CT
DIGITAL X , OVER
RETURN
ANGLE
DIR AUD
ATT FNC
CD OPEN/CLOSE TAPE OPEN/CLOSE
DSP SRC
AM
FM
4 ¢
EQ
#6 KBS
#5 #3
#2
#1 DISP
DISP
1
2 3 4 5 6
EQ FM +
AM –
Equalizer/Analyzer display
KBS name/Spectrum analyzer name/Equalizer frequency and level display