Kenwood DM-9090 - Manual (Page 50)

DM-9090 (En)
50
Timer operations
1
Turn the powers of the associated components ON.
Playback or recording can also be activated at the desired
time by using a commercially available timer.
Audio timer
Connect the power cords of the associated components so that their
power can be turned ON through the audio timer.
Also, be sure to read carefully the instruction manual of the timer.
Do not set timer recording in a way that the power is not turned ON
for more than 3 days; otherwise, the last recorded data may be
cleared.
Tuner
Amplifier
Audio cord
DM-9090
Audio cord
Timer playback, timer recording
÷ Set the POWER key of the unit to ON.
For timer playback
1 Load a recordable Mini Disc.
2 Receive the desired radio
station.
3 Select the desired source
with the REC INPUT key.
§
4 Adjust the recording level.
Make preparations.
÷ For timer recording, be sure to set the write protect tab to enable
recording. 7
÷ For timer recording, be sure to check the remaining recording time.
o
2
5
÷ After having set the timer, be careful not to press the ON/STANDBY
key of the remote control unit to ON; otherwise the timer operation
would be activated.
Set the timer so that the tuner
reception can be started at the
desired time of the day. Set the timer so that it sup-
plies power at the specified
time.
Set the timer ON time.
4
For timer recording
Set the TIMER.
TIMER
OFF
PLAY REC
TIMER
OFF
PLAY REC
÷ When the set time comes, the disc playback or recording starts
automatically. (Also be sure to read the instruction manual of the
connected component carefully.)
1 Play the Mini Disc.
2 Adjust the amplifier volume.
3 Stop the disc.
Minimize the amplifier volume.
3
Set the amplifier volume.
Refer to “Memory backup”. 8
Load a prerecorded Mini Disc.
For timer recording
For timer playback For timer recording
For timer playback
For timer playback For timer recording
PHONES