Kenwood DM-9090 - Manual (Page 20)

DM-9090 (En)
20
1
Initiate the program mode.
2
3
1 Load a disc.
2 Put the MD recorder in stop mode.
Programming
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
Preparation
Select track numbers in the order you want to play them.
Start playback.
1 Select the track number to be played.
2 Set the input track number.
Repeat steps 1 and 2 till the desired tracks
have been programmed, in the desired order.
Press numeric keys in the following order.
To select track No. 12:
Press in order of 0, 2 then the CHARA. / P.MODE key.
÷ Up to 32 tracks can be selected. “FULL” is displayed when no more
track can be programmed.
÷ If you made a mistake, press the CHARACTER DELETE / CLEAR key
and enter the track No. again.
÷ An extremely shot track cannot be programmed.
÷ “– ✱✱ : ✱✱” is displayed when the total programmed period has
attained 256 minutes or more.
÷ Tracks will be played in the order they are programmed.
÷ When the 4 or ¢ key is pressed during playback, tracks will be
skipped in the direction of the pressed key.
Total remaining time of the
programmed tracks Track No. being played
÷ The input operation is aborted if the CHARA. / P.MODE key is not
pressed while the indicator is blinking.
“PGM” lights up
Selected track Programmed order
Programming tracks in a desired order
Each press switches the mode.
1 Track mode : PGM goes off
2 Program mode : PGM lights up
7
P.MODE
CHARA.
1 2 3
4 5 6
7 8 9
+100 0 +10
ABC DEF
MNO JKL GH I
PRS TUV WXY
’ , : ? QZ & ( ) - /
P.MODE
CHARA.
3
OVER ( − dB)
R
L
TOTAL
- - - - 0 : 0 0
15 9 12 7 5 1 3 40 30 21 18 0
SEARCH PGM
MONITOR
ANALOG
32kHz
2 1 3
48kHz
44.1kHz
DIGITAL
OVER ( − dB)
R
L
TOTAL
0 1 2 P - 0 1
15 9 12 7 5 1 3 40 30 21 18 0
SEARCH PGM
MONITOR
ANALOG
32kHz
2 1 3
48kHz
44.1kHz
DIGITAL
OVER ( − dB)
R
L
TOTAL
0 1 2 - 3 0 : 2 0
15 9 12 7 5 1 3 40 30 21 18 0
SEARCH PGM
MONITOR
ANALOG
32kHz
2 1 3
48kHz
44.1kHz
DIGITAL