Konica Minolta Magicolor 2450 - Manual (Page 68)

Media Types 54
"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
„ Layered
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m 2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
"
43 lb bond is also referred to as 90 lb index stock.
DO NOT use thick stock that is
„ Mixed with any other media in the trays (as this will cause printer misfeed-
ing)
Capacity Tray 1 Up to 50 thick stock sheets, depending on
their thickness
Tray 2 Not supported
Orientation Face up
Driver
Media Type
Thick
Weight 91 to 163 g/m² (25 to 43 lb bond)
Duplexing Not supported