Konica Minolta Magicolor 2450 - Manual (Page 56)

Configuration Menu Overview 42
"
All factory default values are shown in bold.
ETHER-
NET
TCPIP ENABLE
Settings
YES /NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
DHCP/
BOOTP
Settings
YES /NO
Select whether or not the IP address is
automatically acquired.
If YES is selected, the IP address is auto-
matically acquired.
If NO is selected, the IP address is not
automatically acquired.
IP
ADDRESS
Setting
192.168.1.2
Set the IP address for this printer on the
network.
Use the Up, Down, Left, and Right keys
to specify the value.
If the IP address is manually specified,
DHCP/BOOTP is automatically set to NO .
DEFAULT
ROUTER
Setting
192.168.1.2
Specify the IP address of the router if one
is on the network. Use the Up, Down,
Left, and Right keys to specify the value.
ENABLE
USB
ACTIVE I/F
JOB TIMEOUT
JOB TIMEOUT
PARALLEL