Konica Minolta Magicolor 2450 - Manual (Page 53)

Configuration Menu Overview 39
"
All factory default values are shown in bold.
REPLACE
TONER
BLACK
Settings
YES /NO
When YES is selected, the carousel rotates to the
black toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 81.
CYAN
Settings
YES /NO
When YES is selected, the carousel rotates to the
cyan toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 81.
MAGENTA
Settings
YES /NO
When YES is selected, the carousel rotates to the
magenta toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 81.
YELLOW
Settings
YES /NO
When YES is selected, the carousel rotates to the
yellow toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 81.
TONER
OUT
ACTION
Settings
STOP /CONTINUE
When set to CONTINUE , printing continues even if the toner
cartridge is empty.
When set to STOP , printing stops when the toner cartridge is
empty.
AIDC REQUEST
AIDC
Settings
NO /YES
If YES is selected, image adjustments are
performed.
MODE
Settings
ON /OFF
If ON is selected, the image adjustments are
applied.
If OFF is selected, image adjustments are not
applied.