Konica Minolta Magicolor 2450 - Manual (Page 36)

Working with the Status Monitor 22
Working with the Status Monitor
Introduction
The Status Monitor shows information about the current status of the printer.
The Status Monitor can be installed from the Software Utilities CD-ROM.
For details on the installation, refer to the magicolor 2450 Reference Guide
on the Documentation CD-ROM.
Operating Environment
The Status Monitor can be used on computers running Windows XP/
Server 2003/2000/Me/98SE/NT 4.0 connected to the printer using the Ether-
net connection.
When Windows NT 4.0 is used, install Windows Media Player (version 6.4 or
later).
Opening the Status Monitor
Use one of the following steps to open the Status Monitor:
„ Windows XP/Server 2003—From the Start menu, choose All Pro-
grams, KONICA MINOLTA, and then Status Monitor. Double-click the
Status Monitor icon displayed in the taskbar.
„ Windows 2000/Me/98SE/NT 4.0—From the Start menu, choose Pro-
grams, KONICA MINOLTA, and then Status Monitor. Double-click the
Status Monitor icon displayed in the taskbar.
Using the Status Monitor
Status Tab
„ Select Printer—Selects the printer whose status is displayed. In addition,
the messages that appear in the message window of the selected printer
are displayed.
„ Graphic—Shows a graphic representation of the printer and indicates
where the problem is. When the background of the printer graphic is red
or yellow, there is an error and the job has been interrupted.
„ Advanced Options—Click Advanced Options to display the Advanced
Options dialog box. From the Advanced Options dialog box, select
whether the Status Monitor automatically starts when the operating sys-
tem is started and whether error notifications are sent by e-mail.