Kodak DC5000 - Manual (Page 69)

61
7
7 Connecting
Your Camera
In order for you to transfer pictures taken with your camera, you first need to
connect the camera to your computer or use a card reader. The camera can
communicate with your computer using one of the following:
q
RS-232 serial cable connection for Windows-based computers.
q
Serial cable or adapter plug for Macintosh computers.
q
Universal Serial Bus (USB) cable connection for both Windows 98 and
2000-based personal computers and Macintosh computers.
q
Card reader. This does not require connecting your camera to your
computer, but is another way to get your pictures from the camera. If you
do not have a card reader, you can purchase one as an accessory. For
details about available accessories, ask a dealer of KODAK products, or
visit our Website at: http://www.kodak.com/go/accessories.
Once the camera is connected to a computer and any required software is
installed, you are ready to transfer pictures from the camera to your computer.
Refer to the online help for information on each software application supplied
with the camera.