Kodak DC5000 - Manual (Page 48)

40
Running a Slide Show on Your Television
View your pictures on the camera LCD, or connect your camera to a television
and display your pictures to a large audience using the Slide Show feature. The
pictures appear on the television for a period of 1 to 99 seconds, a time you set
from the camera. The slide show ends after all the pictures have been shown; or,
if you are using a Kodak-specified AC adapter, the slide show continues until you
stop it.
1 Set the Mode dial to Review.
2 Slide the POWER switch to the right to turn on
the camera.
The last picture taken appears on the
LCD screen.
3 Press the Menu button.
The main Review Menu screen appears.
4 Press a button until the icon is
highlighted.
5 Press the DO-IT button.
The Slide Show Interval screen appears.
6 Use the buttons to select the number
of seconds you want the pictures to appear on
the television.
If you want to view a slide show on the camera
LCD, press the DO-IT to start and stop the
slide show.
7 Insert the video cable into the video-out port
on the side of your camera, and connect the
other end of the video cable to the video-in
port on the television.
8 Turn on the television.
You may need to adjust the Video Out setting
to NTSC or PAL television signals. See page
49 for details.
9 Press the DO-IT button to start and stop the
slide show.
Menu
Capture
Setup
Review
/
/