Kenwood KDV-5241U - Manual (Page 8)

8 | KDV-5241U
Preparation
Cancel the display demonstration and set the clock
• See also pages 36 and 37.
1 Turn on the power.
2 Enter the PSM settings.
3 Cancel the display demonstrations
Select “Demo”, then “Off”.
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H”, then “24Hours” or “12Hours”.
4 Finish the procedure.
Changing the display information and pattern
• When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display Audio level meter display
(see “LevelMeter” on page 36)