Kenwood KDV-5241U - Manual (Page 36)

36 | KDV-5241U
4
Adjust the selected PSM item.
5
Repeat steps 2 – 4 to adjust other PSM items
if necessary.
6
Finish the procedure.
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 36 – 39.
1
Enter the PSM settings.
2
Select a PSM category.
3
Select a PSM item.
By pressing either one of the buttons repeatedly,
you can also move to the item of the other
categories.
General settings — PSM
Category Indication Item
( : Initial) Setting, [reference page]
MOV
(movie)
Demo
Display
demonstration • On
• Off
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [8].
: Cancels.
LevelMeter
Audio level meter • Meter 1
• Meter 2 : Select the different level meter patterns.
• Press DISP to show the selected level meter.
CLOCK
Clock Disp * 1
Clock display
• On
• Off
: Clock time is shown on the display when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [8].
* 1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “Off” to
save the car’s battery.
To display the rest