5 - maintenance port parser commands, 5 maintenance port parser commands – KVH Industries LF User Manual

Page 37

Text mode
Original mode

2. Open the terminal emulation software and

establish the following settings:

• Bits per second: 9600

• Data bits: 8

• Parity: None

• Stop bits: 1

• Flow control: None

3. Apply power to the TracVision LF/SF system and

allow the system to complete full initialization.
Data should be scrolling on the PC display to
identify any system problems detected. If no data
is seen, recheck your connections and the terminal
software setup.

4.5

Maintenance Port Parser
Commands

TracVision LF/SF system parser commands are detailed in
Appendix F.

4-7

Troubleshooting

54-0194 Rev. D