Kyocera QCP 2035 - Manual (Page 44)

38 Troubleshooting
d. Tilt the phone to remove the
battery. The ESN is visible after the
battery is removed. It should start
with “179-” or “B3-.”
Replace the battery as follows:
a. Extend the antenna.
b. Place the battery into the phone
with the metal contacts facing
down and towards the bottom of
the phone.
c. Lay the keypad flat inside the
faceplate.
d. Align the slots in the phone to the
posts on the faceplate.
e. Close until latched together.
f. Align the battery door to the
grooves on either side of the
phone.
g. Slide the battery door on while
pressing down firmly, ensuring that
the battery door clicks into place.
Check and repeat if the battery
door is not aligned. Do not force.
d
c
e