Kenwood EZ900HDS - Manual (Page 23)

English | 45 44 | English
Specifications
Specifications subject to change without notice.
Analog FM tuner section
Frequency range (200 kHz space)
: 87.9 MHz – 107.9 MHz
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 µV/75 Ω)
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 µV/75 Ω)
Frequency response (±3 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO): 70 dB
Selectivity (±400 kHz): 80 dB
Stereo separation (1 kHz): 40 dB
Digital FM tuner section (Ez900HDS)
Frequency range (200 kHz space)
: 87.9 MHz – 107.9 MHz
Frequency response (±3 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (STEREO): 85 dB
Analog AM tuner section
Frequency range (10 kHz space)
: 530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB): 28 dBµ (25 µV)
Digital AM tuner section (Ez900HDS)
Frequency range (10 kHz space)
: 530 kHz – 1700 kHz
Frequency response (±3 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (STEREO): 70 dB
Sirius tuner section
Frequency range (Overall): 2320MHz–2332.5MHz
Frequency range (TDM Channel#1(fc))
: 2322.293MHz
Frequency range (COFDM Channel#1(fc))
: 2326.25MHz
Frequency range (TDM Channel#2(fc))
: 2330.207MHz
Usable sensitivity (TDM Channel)
: -91dBµ – -55dBµ
Usable sensitivity (COFDM Channel)
: -88dBµ – +4dBµ
Audio Sampling: 48KHz
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 1 Bit
Spindle speed
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (±1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.01 %
Signal to Noise ratio (1 kHz)
: 105 dB
Dynamic range
: 93 dB
Channel separation
: 96 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
Audio section
Maximum output power
: 50 W x 4
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Tone action
Bass : 100 Hz ±10 dB
Middle : 1 kHz ±10 dB
Treble : 10 kHz ±10 dB
Preout level / Load (during disc play)
: 2000 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
Auxiliary input
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 100 kΩ
General
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W x H x D)
: 178 x 50 x 165 mm
7 x 1-15/16 x 6-1/2 inch
Weight
: 3.1 lbs (1.4 kg)