Kenwood EZ900HDS - Manual (Page 16)

30 | English English | 31
Menu system
In HD Radio mode
Receive mode Setting
Sets the receive mode.
1 Select the Receive mode
Press the [AUDIO] knob.
Select the "Receive Mode" display.
• This function can be used the [FM] / [AM] button.
2 Enter Receive mode
Press the [MENU] button.
3 Set the Receive mode
Press the [AUDIO] knob.
Each time the knob is pressed the Receive mode
switches as shown below.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass FLT" Bass boost level is flat.
"AMP Bass +6" Bass boost level is low (+6dB).
"AMP Bass +12" Bass boost level is mid (+12dB).
"AMP Bass +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass +18" won’t work
correctly even if it’s selected.
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
Display Setting
"AMP Freq NML" Boost with the normal central frequency.
"AMP Freq Low" Drop the normal central frequency 20%.
In SIRIUS source
SIRIUS ID (ESN) display
Displaying the SIRIUS ID (Electronic Serial
Number) display.
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.
In FM reception (Ez700SR)
In HD Radio (FM) mode (Ez900HDS)
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display Setting
"CRSC ON" The CRSC is ON.
"CRSC OFF" The CRSC is OFF.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
In SIRIUS source
SIRIUS Channel Skip/ Lock Setting
You can Skip and Lock unwanted channels while
tuning and prohibit access to the particular
channels. (Channel Lock function without channel
number 184)
1 Select Channel Skip/ Lock mode
Press the [AUDIO] button.
Select the "Skip/ Lock" display.
• This function can be used the [FM] / [AM] button.
2 Enter Channel Skip/ Lock mode
Press the [MENU] button.
"CH- *** - - " is displayed.
3 Select the channels
Turn the [ 4] / [¢] knob.
4 Set the item (Channel Skip or Lock)
For Channel Skip:
Press the [AUDIO] knob.
When it's ON, "CH- *** S - " is displayed.
Each time the [AUDIO] knob is pressed, the
Channel Skip switches ON or OFF.
For Channel Lock:
Press the [AUDIO] knob for at least 1 second.
When it’s ON, "CH- *** S L " is displayed.
• Channel Skip is automatically set in the unit when you
set the Channel Lock function.
5 Exit Channel Skip/ Lock mode
Press the [MENU] button.
Canceling the Channel Lock mode
1 Select Channel Skip/ Lock mode
Press the [AUDIO] button.
Select the "Skip/ Lock" display.
• This function can be used the [FM] / [AM] button.
2 Enter Channel Skip/ Lock mode
Press the [MENU] button.
"CH- *** - - " is displayed.
3 Select the channels
Turn the [ 4] / [¢] knob.
4 Cancel for Lock mode
Press the [AUDIO] knob for at least 1 second.
"CODE ----" is displayed.
5 Select the digits to enter
Press the [AUDIO] knob.
• This function can be used the [FM] / [AM] button.
6 Select the Lock Code numbers
Turn the [ 4] / [¢] knob.
7 Repeat steps 5 and 6, and complete the Lock
Code.
8 Confirm the Lock Code
Press the [AUDIO] knob for at least 1 second.
"APPROVED" is displayed.
9 Exit Channel Skip/ Lock mode
Press the [MENU] button.
Receive mode Display Operation
Auto mode "Auto" Analog broadcasts and digital
broadcasts will be switched
automatically.
When both are being transmitted,
the digital broadcast will have
priority.
Digital "Digital" Digital broadcasts only.
Analog "Analog" Analog broadcasts only.
• This function can be used the [FM] / [AM] button.
4 Exit Receive mode
Press the [MENU] button.
• Even if the "Auto" setting, an analog broadcast will be
received during the reception of a ball game mode
(non-delayed broadcast program).