Kenwood DPX-7010MD - Manual (Page 15)

— 15 —
This function permits the connection of optional players and
the playing of discs other than the loaded CD/MD (in the
current unit).
Playing Discs:
Press the SRC (source) button repeatedly to select the external
disc control mode.
The disc will start playing.
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
• "CD-CH/MD-CH" ...when a disc changer is connected
• "CD-CH1/MD-CH1/DISC-CH1" , "CD-CH2/MD-CH2/DISC-CH2"
...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
NOTE
Playing Other Disc mode
Switch the display that appears while discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows:
• You can give names to discs through the presetting disc name
function (see p. 19).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that doesn't have one,
"No Name" is displayed instead.
• When an attempt is made to display the title of a disc for which
a disc title/track title has not been recorded, the CD will display
"No Text" , the MD player built into this unit will display "No
Title" , and an MD changer will display "No Title/No Name".
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
NOTE
Track time
Total disc playing time (CD only)
Disc name (DNPS)(CD only)
Track title (Units featuring CD text/MD only)
Disc title (Units featuring CD text/MD only)
Clock
Character
Switching Display for Discs
"N"-operation:
• The disc title and track title of the CD text can be displayed.
• The disc name will be displayed when the name has been
registered to any connected unit with the Presetting Disc
Names function, or when the playing unit contains a disc to
which the disc title has been recorded.
"O"-operation:
• CD text cannot be displayed.
• Regardless of the control unit, the characters that can be
registered with the Presetting Disc Names function are "A~Z
0~9 /, +, –,
∗ , =, <, >, [ , ]".
• The disc name will be displayed when the name has been
registered to the playing unit with the Presetting Disc Names
function.
The CD text and Presetting Disc Names functions may not be
operational depending on the unit.
NOTE
When one disc has finished playing its last track, the next disc in
the changer will start playing. When the last disc in the changer
has finished, the player will return to the first disc and start
playing it.
NOTE