Konica Minolta Z20 - Manual (Page 99)

99
When the USB connection is completed, a drive icon, or volume,
appears in My Computer or the desktop; the name varies with
memory card. When using Windows
® XP or Mac OS X, a window
may open requesting instructions on what to do with the image data;
follow the directions in the window.
Windows XP
Mac OS X
Windows
Mac OS
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows
® 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows
® or Macintosh operating systems.
CONNECTING TO WINDOWS 98 AND 98 SE
Before connecting the camera to the computer, place
the DiMAGE Viewer CD-ROM in the CD-ROM drive.
The DiMAGE installer menu should automatically
activate. To automatically install the Windows
® 98 USB
driver, click on the starting-up-the-USB-device-driver-
installer button. A window appears to confirm that the
driver should be installed; click “Yes” to continue.
When the driver has been successfully installed, a
window appears. Click “OK.” Restart the computer
and connect the camera (p. 98) to complete the
operation.
Automatic Installation
DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 99