Konica Minolta Z20 - Manual (Page 117)

117
LCD monitor care
• The LCD monitor is manufactured using high-precision technology and more than
99.99% of the pixels operate properly. Less than 0.01% of the monitor pixels are
displayed as color or bright points; this is not monitor defect and does not affect the
recorded image.
• Do not apply pressure to the surface of the LCD monitor; it may be permanently
damaged.
• In cold temperatures, the LCD monitor may become temporarily dark. When the
camera warms up, the display will function normally.
• If fingerprints are on the LCD monitor, gently wipe with a soft, clean, dry cloth.
Batteries
• Battery performance decreases with temperature. In cold environments, we
recommend keeping spare batteries in a warm place, such as the inside of a coat.
Batteries can recover their power when they warm up.
• If batteries have been exhausted when used in the camera, do not reload them even if
their charge seems to recover over time. These batteries will interfere with normal
camera operation.
• A special built-in long-life battery supplies power to the clock and memory when the
camera is off. If the camera resets each time it is turned off, the battery is exhausted.
The battery must be replaced at a Konica Minolta service facility.
Operating temperatures and conditions
• This camera has been designed for use in temperatures from 0°C to 40°C (32°F to
104°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car
parked in the sun, or to extreme humidity.
• When taking the camera from a cold to a warm environment, place it in a sealed plastic
bag to prevent condensation from forming. Allow the camera to come to room
temperature before removing it from the bag.
DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 117