Konica Minolta Z20 - Manual (Page 88)

88 S ETUP MENU
LCD MONITOR BRIGHTNESS
Monitor brightness can be adjusted in 11 levels.
Brightness can be set individually for viewfinder
and direct viewing in the recording mode. Turn the
mode switch to the appropriate position before
opening the brightness option in section 1 of the
setup menu (p. 87). Also see page 28.
Use the left/right keys of the controller to adjust
brightness, the monitor image changes
accordingly. Press the central button of the
controller to set the level.
AUTO POWER SAVE
To conserve battery power, the camera will shut down if no operation is made within a
certain period. The length of the auto-power-save period can be changed to 1, 3, 5, or 10
minutes. When the camera is connected to a computer, the auto-power-save period is
fixed at ten minutes. Auto power save is set in section 1 of the setup menu (p. 87).
Set LCD brightness
:adjust :enter
Low High
DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 88