Kodak DRHD-120 - Manual (Page 14)

Connection
Connection 14
Connection for Audio Output Terminals
You can enjoy the Dolby surround sound by
connecting 5.1ch audio output or digital audio
output to the audio amplifier.
5.1ch Audio Output
Use 5.1ch audio outputs for connection with your
5.1ch A/V receiver or amplifier. From the AUDIO
SETUP menu, set “Analog Output” to “ 5.1 Surround”.
Digital Audio Output
Use digital audio outputs for connection with
Dolby Digital or DTS decoder. From the Digital
Audio Output menu, select “PCM” or “Bitstream”
according to your decoder.
Connection for A/V Input Terminals
You can record programs from AV system such
as VCR, Satellite receiver or Decoder box.
Audio Input
Connect the Audio Input to the Audio Output of
AV system.
Video Input
Connect the Composite Video or S-Video Input to
the Composite Video or S-Video Output of AV
system.
Or connect the Euro AV IN/OUT to the Euro AV
OUT of AV system.
Connection for DV IN
Using the DV IN, it is possible to read digitally the
contents of DV tapes.
DV Input
Connect the DV IN to the DV in/out jack on your
DV camcorder using a DV cable (not supplied).
• An optical cable and coaxial cable are not supplied.
NOTE