Kenwood VZ907 - Manual (Page 9)

English
9
Setting Preout:
Touch the [ PREOUT ] to switch the non-fading preout " NON-FAD "
and Rear preout " REAR ".
Adjusting Non-Fading Preout Level:
• Each time you touch the [ < ], The front and rear sound decreased.
• Each time you touch the [ > ], The non-fading sound increased.
Setting High-Pass Filter for Front and Rear Output:
Each time you touch the [ < ] or [ > ] ,You can select the frequency to be
cut, as follows:
Ending Audio Control Screen:
Touch the [ OK ] to return the menu screen.
Adjusting Audio
Adjust various parameters of sound quality.
Switching Audio Control Screen:
Touch the [ AUDIO ] on the menu screen to switch the audio control
screen.
Switching Setting Lists:
Touch the [ ∞ ] or [ 5 ] , to switch the audio control lists.
Adjusting Balance and Fader Levels:
• Each time you touch the [ 2 ](LEFT), Left channel emphasized.
• Each time you touch the [ 3 ](RIGHT), Right channel emphasized.
• Each time you touch the [ 5 ](FRONT), Front channel increased.
• Each time you touch the [ ∞ ](REAR), Rear channel increased.
Adjusting Bass Level:
• Each time you touch the [ < ], Bass decreased.
• Each time you touch the [ > ], Bass increased.
Adjusting Treble Level:
• Each time you touch the [ < ], Treble decreased.
• Each time you touch the [ > ], Treble increased.
Turning Loudness On/Off:
This function amplifies low and high tones when the volume is turned down.
The LOUD indicator is displayed on the source control screen , when the
loudness function is on.
Touch the [LOUD ] to switch the loudness on " ON " and off " OFF ".
SCREEN CONTROL AUDIO CONTROL OK
LOUD ON
TREBLE
BASS
REAR
LEFT
FRONT
RIGHT
BALANCE / FADER
SCREEN CONTROL AUDIO CONTROL OK
NON-FAD PREOUT
HPF FRONT 150 KHz
HPF REAR 150 KHz
NON - FADER LEVEL
REAR
LEFT
FRONT
RIGHT
BALANCE / FADER
Audio Control Function (with A907)
THROU (through) 40Hz 60Hz 80Hz
220Hz 180Hz 150Hz 120Hz 100Hz
BEST H I TS
LOUD
LOUD indicator