Kenwood VZ907 - Manual (Page 7)

English
7
Switching Monitor’s Picture
The monitor’s picture switches as shown below each time the V.SEL
button is pressed.
3 Television or Video 1 or Video 2 3 Navigation 3 Video 2
You cannot view video pictures while the vehicle is moving. To enjoy
video pictures, find a safe place to park and engage the parking
brake.
Switching AV Output Picture
The AV output picture switches as shown below each time the V.SEL
button is pressed for over 1 second. (The current setting is displayed
when the picture is switched.)
▼
NORMAL :Picture selected from the TV control menu(page 26)
▼
TV :Picture from the television
▼
VIDEO 1 :Picture input to the AV-IN1 terminal
▼
VIDEO 2 :Picture input to the AV-IN2 terminal
When the A907 is connected, the sound of the AV output also switches.
Turning Monitor’s Picture Off
Press the SCRN button for over 2 seconds to turn the monitor’s
picture off.
The picture reappears when a button on the monitor panel is pressed,
when the monitor is lowered then lifted again, and when the engine key
is removed then reinserted.
NOTE
NOTE
CAUTION
COLOR COLOR
BRIGHT BRIGHT
DIMMER DIMMER
TINT TINT
MONITOR SLIDE MONITOR SLIDE
Displaying Screen Control Screen
Pressing the SCRN button will cause the screen control screen (screen
adjustment mode) to be displayed on the video screen.
Adjusting Picture Quality:
[BRIGHT] [ 5 ](+) : The screen gets brighter.
[ ∞ ](-–): The screen gets darker.
[COLOR] [ 5 ](+) : The screen color gets paler.
[ ∞ ](-–): The screen color gets deeper.
[TINT] [ 5 ](red) : Red is intensified. [ ∞ ](green): Green is intensified.
[DIMMER] This can be adjusted to any one of three levels.
[
5 ](+): The screen gets brighter. [ ∞ ](-–): The screen gets darker.
Adjusting Slide Position:
[MONITOR SLIDE] This can be adjusted to twe positions.
[
∞ ]: The monitor to front. [ 5 ]: The monitor to back.
Cancelling Screen Control Screen:
Touch the [ OK ] .
• With PAL type products, the TINT adjustment does not operate.
• The colour and tint cannot be adjusted for the navigation screen
or the graphic screens (source control, etc.).
• The dimmer cannot be adjusted when the vehicle’s lights are off
or when the illumination cable is not connected.
• Separate picture quality settings can be stored for the television,
video 1,video 2 and navigation screens and for day and night.
NOTE
V.SEL FNC SCRN MODE
V.SEL
SCRN
FNC
MODE