Kenwood XD-6550 - Manual (Page 40)

XD-8550/XD-6000 (En/T)
4 0
Preparation section
Basic section
Application section
Knowledge sections
Playback of CD
(DP-MH5)
Playback of CD
For XD-8550
If it is in play mode
Select the “CD” input.
1
Check that the CD player is in the stop mode.
2
3
÷
The disc can also be selected with the Disc selector (DISC 1~DISC 6) key.
÷
Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷ To program all tracks of a CD, select the disc and then press the
P.MODE key without selecting any tracks.
÷
If you make a mistake, press the P.MODE key to quit the program mode
and restart from step
2.
Any titles can be listened to in the desired sequence.
(Max. 32 titles)
Light the “PGM” indicator.
Enter track Nos. in the order you want to play them.
1Select the disc.
To select tracks from more than one CD,
repeat steps
1 2 and 3.
3Press the P.MODE key.
Start playback.
4
PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
AUTO
TUNED DISC ALL
STEREO
kHz
MHz
MUTE
12
PROG. N.B.
D 2 * ) 3 * P - ) : 1
1 2 3 4 5
11 12 13 14 15
6 7 8 9 10
MAX
÷ Tracks will be played in the order they were programmed (in order of
P Nos.).
÷ When the 4 or the ¢ key is pressed during play, the program will
jump to the preceding or the following track respectively.
÷
When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
PGM MEMO EDIT RDS EON TA
AUTO
TUNED DISC ALL
STEREO
C D *
MAX
SLEEP O.T.T
Lights
7
P.MODE
PTY
SEARCH
2 3 1
5 6 4
8 9 7
0 +10
Go to step 3 within 8 seconds.
Press the numeric keys as shown below....
To enter track No. 23 : 003
To select track No. 40 : 0000)
6
2Select the track.
DISC SKIP
Disc No.
Track No.
Program No.
Go to step
2 within 8
seconds.
Listening in the desired sequence
(program playback)
Character information indicators cannot be displayed while
the spectrum analyzer display is used. Switch to the dual
display or character display mode to see the information.
!´
Note Note