Kenwood XD-6550 - Manual (Page 34)

XD-8550/XD-6000 (En/T)
3 4
Preparation section
Basic section
Application section
Knowledge sections
Let's record
Adjusting the recording level
Restarting recording
The following procedure allows to re-record sound from the
middle of recording.
The following procedure assumes the presence of a non-
recorded section of 4 seconds before the recording start
position.
1Press the key during recording.
2Return the recording source compo-
nent to the position you want to
restart recording, and put the source
component to pause mode.
3Press the REC/ARM key twice.
4Press the REC/ARM key once.
5Play (Receive) the music to be re-
corded.
÷
Recording is stopped, the tape is returned to the recording start
position, and the deck enters stop mode after leaving a non-recorded
section of about 2 seconds after the previous music.
÷
If there is no music recorded before the recording start position, the
deck enters stop mode after tape rewinding.
1Perform the procedure of “Record-
ing” until step 4. ¤
2Adjust the recording level.
3To restart recording
÷
If the recorded sound is too large or distorted, decrease the recording
level. If it is too low, increase the recording level.
O p π
O p π
O p π
O p π
O p π
LEVEL
ADJUST
REC / ARM
1 ¡
REC / ARM
REC / ARM
When the tape is
moving
3 way.
When the tape is
moving
2 way.
PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
AUTO
TUNED DISC ALL
STEREO
kHz
MHz
MUTE
12
PROG. N.B.
A D J U s T + 1 + : 1
1 2 3 4 5
11 12 13 14 15
16 17 18 19 20
6 7 8 9 10
MAX
SLEEP O.T.T. ECHO P.B.C. EQ.
ON MANU.
The adjustment range is
between -2 ~ +2.
Blinks.
8
PAUSE REC / ARM REC / ARM
÷
The deck enters record-pause mode after leaving a non-recorded
section of about 4 seconds.
÷ In case recording is restarted from the beginning of a tape, feed the
leader tape (the non-recordable section at the beginning of each side of
tape) manually before starting recording.
÷
When recording a CD, the CD playback and tape recording can be
started simultaneously by pressing the CD play (
6) key in step 4.
In a few sec., REC/ARM and
PAUSE keys light up.
Lights