To change or delete a title name – Kenwood DPF-J9010 User Manual
Page 22
22
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Registration of Title Name
DELETE/
CLEAR
CURSOR
L
R
1
¡
CURSOR
L
R
1
¡
SET
INSERT
C
A
Z
B
= >
O
S
E
N
O
B
Y
D
T
C
O
M
L
N
= >
O
S
E
N
O
B
Y
D
T
C
CHARACTER/SEARCH
DOWN
UP
4
¢
Preparation
÷ Close the door panel.
0
1
Perform steps
1 and 2-1 of “Assigning Title
Names”.
)¡
÷ Call the disc title or track title to be changed.
÷ Deletion mode is cancelled when the MODE key is pressed.
To change or delete a title name
2
Change or delete characters one by one.
1Select overwrite or insert mode.
£
Press until the character to be entered
comes to the position of the flashing
cursor.
Change
2Move the cursor to the desired char-
acter (to be changed).
3Select a character.
4Set the selected character.
1Move the cursor to the desired char-
acter (to be deleted).
Deletion
2Press the DELETE key.
÷ If the title to be changed is too long to be displayed on the display
section, press the
1 or ¡ key to scroll the display so that the
characters hidden until then appear.
+ Move with the 1 ¡ keys =
Flashing cursor
÷ The characters also can be selected with the DISC SKIP knob on the
main unit (provided that the OPERATION-A indicator is lit). Turn the
knob until the character to be entered comes to the position of the
flashing cursor.
÷ When a title name is to be deleted, delete all characters one by one.
DISPLAY-A