Kenwood DPF-J9010 - Manual (Page 14)

14
CD-2280M/DPF-J9010 (En)
: Keys and controls used in the operations described on this page.
Normal play (TRACK mode)
SET
ABC
2
DEF
3
JKL
5
GHI
4
MNO
6
1
TUV
8
PRS
7
WXY
9
QZ
0
& ( ) – /
+100
' , : ? !
+10
SET
CHARACTER/SEARCH
DOWN UP
4 ¢
CURSOR
L R
1 ¡
1 D 3 2 0 8 : 1 3 2
1 D 3 2 : 1 3 2
∞ DISC SKIP 5
Playback from desired track
1
Select the disc.
1Select the disc number.
Previous disc Next disc
2Set the input.
Go to step 2 within 8 sec.
2
Select the track number.
1Input the track number.
2Set the input.
Skipping tracks
To skip forward To skip backward
÷ When the 4 key is pressed once during playback, the track being
played will be played from the beginning.
Display when disc No. 123 is selected
÷The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
÷When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected while looking at the registered contents.
“Registration of Title Name”
)
÷Repeat step 1 when it is required to change the disc number.
Press the numeric keys in the following order...
Track No.8 : 8
Track No.14 : 14
Track No.20 : 2)
Display when track No. 8 is selected
÷ When the disc corresponds to CD-TEXT, or when the track titles have
been registered, the track title will be displayed with scrolling. Tracks
can be selected while looking at the registered contents.
“Registration of Title Name”
)
÷ Playback starts.
÷ If the selected disc is being played on the other mechanism, blinking
“DISCXXX BUSY!“ is displayed and the disc will not be played.
÷ Repeat step 2 when it is required to change the track number.
Searching
Backward search Forward search
÷ Playback starts from the position where the key is released.
Preparation
÷ Load discs into the carousel. 0
÷ Select the Mechanism-A or Mechanism-B.
!
Within 8 seconds!
Within 8 seconds!
Note Note
If it is Mechanism-B that is selected, use the main unit keys for these operations.